It’s no surprise that Spyderco is one of our favorite brands here at BestPocketKnifeToday.com. The Colorado based company continues to demonstrate a dedication to high quality and innovation by designing folding knives that strike an acute balance between high performance and practicality. Still, not everything that leaves the Spyderco factory is perfect but every now and they produce a real winner.
I tend to look at a whole bunch of factors when deciding whether a pocket knife meets the gold standard. It has to be more than just sharp! In my earlier review of the Spyderco Tenacious I felt that they got the balance of quality, function and price almost perfect. For the budget EDC category I find the Tenacious is hard to beat. In moving to the higher end offerings there is one particular knife that is talked about a great deal in the community and it’s gathered a staunch following over the years. Of course, I’m talking about the Spyderco ParaMilitary 2.
I felt like a solid review of the ParaMilitary 2 was warranted because I’m often asked whether this knife lives up to the hype and is it worth the money? Also, I often get asked why this particular pocket knife is so damn popular? Well, I’ll attempt to explain that throughout the review. So, let’s get into it.
As you may have guessed, the ParaMilitary 2 is the successor to the original ParaMilitary which first debuted in 2004. The ParaMilitary came about primarily as critics complained about the overwhelming size of the otherwise highly regarded Military pocket knife. So, Spyderco released the ParaMilitary as a mid-sized version at two thirds the size of the Military. It had a top quality S30V blade which extended just over 3 inches long and accompanied by a G-10 handle with a first rate compression lock. The ParaMilitary really was at the top of its class for a mid-size survival knife.
So why the need for the ParaMilitary 2? Well, Spyderco is one of the few companies that continually strives to better itself and outperform on a regular basis. It rarely chooses to sit on its laurels and wait to be outshone by a competitor before bringing something new to market. The experts at Spyderco loved the ParaMilitary but knew they could do better and hence the ParaMilitary2 was born in 2010.
Below is a summary of the key changes made to the original ParaMilitary.
- The G-10 handle has been slimmed at the end to improve handling and overall ergonomics.
- There’s an upgraded pocket clip with 4-way positioning for tip up/down carry and left/right handed. The clip also positions the knife deeper into the pocket for increased concealment.
- They introduced skeletonized liners on both sides and in particular where it sandwiches the pivot area.
- The blade has been elongated a little and carries jimping on both the spine and finger choil.
- A new pivoting system with bushings has been added for an improved deployment action which is more fluid.
- The pivot pin is now recessed.
- The blade is slightly thinner and the corner no longer sticks out when closed.
- The lanyard hole has been made larger.
As you can see the differences are subtle but in aggregate they make for much improved performance and simply a better knife all round. Let’s get into some of the details…
- Blade length: 3.44 inches
- Overall length: 8.28 inches
- Closed length: 4.81 inches
- Weight: 3.75 ounces
- Blade material: S30V stainless steel
- Country of origin: USA
- Price range: About $150
The Spyderco ParaMilitary 2 is a mid-sized EDC (slightly on the larger end) measuring around 8.3 inches in total. It has a premium full flat ground plain edge blade which is manufactured with the remarkable S30V steel as standard. The blade measures about 3.4 inches in length with a cutting edge of just over 3 inches. I measured the blade to be about 0.15 inches thick. The handle is made of the ever popular G-10 material and measures around 4.8 inches long. It’s about half an inch thick and comes with stainless steel liners that are skeletonized. Retail price is about $120 which I’ve come to realize is somewhat of a bargain for this baby.
The ParaMilitary 2 is not particularly heavy for its size at 3.75 ounces. It feels tremendously stable and firm in the hand as you tend to expect from Spydie’s these days. The trademark Spyderco thumb hole is unusually large and a joy to use. The locking mechanism is a compression lock which I’ll touch on a little more later but overall works exceedingly well. The pocket clip is 4-way adjustable so you have the best of all worlds.
The design of the US made ParaMilitary 2 is really what sets it aside from the competition in my opinion. The original ParaMilitary was an excellent knife but this one is a real step up. Everything about this knife screams Spyderco from the moment you see it to when you perform your first cut. By that I mean it’s quality. You rarely see ergonomics work as well as this on a pocket knife. It’s tough to describe but everything about it just feels right.
I found my thumb and forefinger fell naturally at the thumb ramp and finger choil. You’ll find rounded corners everywhere and some nice jimping on the thumb ramp, finger choil and the liners placed behind the thumb ramp. The jimping has a pleasant feel tool – not too rough. No surprise to see that the blade is perfectly centered. Note the spine of the blade is perfectly flat contrary to the slightly curved appearance sometimes seen in pictures.
The Spydie hole is larger than normal and permits opening with gloves. The G-10 handle has just enough scaling to resist slipping without feeling uncomfortable. It’s for sure a larger EDC but you’re able to use it with the same maneuverability you have with a much smaller knife. Pick one up and you’ll know what I mean.
Overall fit and finish is excellent. Everything was tightly manufactured and I saw little to no “factory mishaps”. The blade is a real work of art. It’s basically a clip point (or some say saber style) with an extra long and pointed tip. Sure, it’s relatively big but the knife means business and you’ll find that length comes in handy more often than not.
The steel is one of my favorites on higher end knives – S30V. I assume most of you know what this is but if not just trust me when I say it’s damn good. The S30V performs very well indeed and arrived razor sharp as you’d expect. I’m consistently astounded at how sharp Spyderco is able to get its factory production knives to be. S30V is a relatively hard steel (though I notice this version is not as hard as I’ve seen on other knives) and will maintain its edge far longer than most all of your ‘cheaper’ knives I assure you. Yes it’s a little bit of a challenge to re-sharpen to the uninitiated but well worth it in the end.
I found the blade to be super effective at a multitude of cuts – slicing, stabbing, thrusting, chopping, you name it. The blade is ground very flat and to great effect. It has more of a belly than other Spyderco offerings such as the Delica. At first I was a little concerned that the tip seemed a little too thin, but after using it extensively and since I tend not to use my knives to pry things open then it wasn’t an issue and I actually welcomed the design.
Opening and closing is very impressive. It’s almost like it operates like an assisted opening knife – so easy, so smooth. The new bushing pivot system on the ParaMilitary 2 is nothing but high end and results in a sweet gliding motion that you wish all your knives had.
In speaking of the compression lock I was again very impressed. When it’s locked up this thing is solid, I mean rock solid. This type of lock should never fail under normal use. Technically the only reason it would fail is if the blade tang would crush the locking tab that fits within the slot in the tang. It’s really not possible under even the most extreme conditions. Imagine combining the liner lock of your Tenacious with the Axis lock of your Griptilian and you sort of have an idea of what’s involved here. In fact I’d put it in the same category as the locking system found on the Sebenza. A word of warning though – if your hands are on the larger side you may encounter the possibility of the lock pinching your palm. It’s not been a problem for me but a couple of buddies mentioned that to me. Still, easy to use, reliable, durable and extremely resistant to all kinds of abuse. Perfection.
In rounding off the rest of the details I find the lanyard hole to be very useful in that’s it’s a little bigger than normal and will take two lengths of 550 paracord easily. After many months of use I’m still super happy. I’ve had the blade deep in all kinds of “gunk” and find it real easy to clean with regular soap and water. After numerous cleanings like this the deployment action is still like it was when I first took it out of the box. It’s really built to last.
The knife comes in four standard varieties: black handle with stainless standard edge blade (C81GP2); black handle with black finish blade and clip (C81GPBK2); digital camo handle with stainless standard edge blade (C81GPCMO2); digital camo handle and black finish stainless blade and clip (C81GPCMOBK2).
I personally like the digital camouflage look with the black blade. You will also see a number of limited edition varieties such as with blue handle and M390 steel. Unfortunately even with all these varieties the sad truth is that the Spyderco ParaMilitary 2 is frustratingly hard to come by these days. You’ll typically find most retailers are out of stock. Bummer I know.
Spyderco Paramilitary 2 vs Manix 2: I find the Manix 2 equally comfortable in my hand compared to the PM2. The Manix 2 comes with more jimping so provides a little more traction. Also, the PM2’s pocket clip has four mounting positions versus only two on the Manix. Where the PM2 excels is the compression lock which is perhaps the best out there and superior to the Manix 2’s ball lock in my opinion. I also find it easier to open/close the Paramilitary 2 with one hand.
Spyderco Paramilitary 2 vs Benchmade Griptilian: It’s no secret the Griptilian is one of my favorites but overall the PM2 is simply a better knife. You’ll pay for it though, at roughly 1.5x the price. The Griptilian is comfortable but it feels totally different in your hands versus the PM2. The Grip fills your hand a little more but feels far more plasticky which can put some people off. The PM2 has superior steel (S30V vs 154CM) and while the Benchmade AXIS lock is excellent it’s sub-par against the PM2’s compression lock. Again, the PM2 wins overall here but perhaps not a fair match given the price difference.
Spyderco Paramilitary 2 vs Benchmade 940: Wow this is tough. Both formidable EDC’s but I give a slight edge to the PM2. The 940 is super light and thin in your pocket. It’s stainless steel handle won’t rip up your jeans as much as the PM2’s G-10 but at the sacrifice of far less grip. The PM2’s blade is better at cutting given the flat grind and extra belly versus the 940. Consider the 940 as a high performance gentleman’s knife whereas the PM2 is more of a tactical warrior.
To wrap up, for what you’re getting I find that the ParaMilitary 2 is easily one of the best value knives out there. This is clearly evidenced by the fact they these knives are often sold out and really quite hard to come by. Seriously people, if you see this knife on sale at your favorite online retailer (I check Amazon regularly) then you should consider grabbing it. If you just happen to see it for under $120 then don’t even think – just buy!
Pros: Superb ergonomics, feels nimble and light, excellent steel and blade shape, amazing locking mechanism, quality construction
Cons: The thin tip may not be suited for all applications
Bottom Line: If you can afford it, buy it. If you can’t, buy it anyway.
I just wanted to take another look at my Spyderco Dragonfly.
Overall Length: 5.44″
Blade Length: 2.31″
Blade Material: VG-10 (Stainless)
Lock: Front Lock
Closed Length: 3.22″
Handle Material: Foliage Green G10
Weight: 2.00 oz.
Country of Origin: Japan
Thanks for watching!
Credits to: BT Blades
The plain-Jane Spyderco Endura 4 may be lacking in exotic blade steel and handle material but it is a classic design that is nearing it’s 25th Anniversary! The original Spyderco Endura was released in 1990 and in the decades since it has become the standard bearer for the modern pocket clip EDC knife.
- 4-way Clip; Screw together construction; Skeletonized steel internal liners; Phosphor bronze brushings; David Boye Dent
- FRN Bi-Directional Textured(TM) Handle; Enlarged opening hole; Spine Jimping; Flat saber-ground blade
- Specifications: Closed – 5″; Overall 8-3/4″; Blade – 3-3/4″; Blade Steel – VG-10
- Weight – 3.6 oz.; Handle Material – FRN
- Hole Diameter – 1/2″; Blade Thickness – 1/8″; Plain Edge
The Spyderco Endura 4 has excellent ergonomics. The funky handle shape will never be confused for the classic lines of a Buck 110 but it just feels right in your hand. I’ve carried one model of the Endura or another since getting my first one in 2002 and I’ve yet to find one that offers anything but comfort in all grips.
The Spyderco Endura 4 introduced what is called “bi-directional” texturing to the Fiberglass Reinforced Nylon (FRN) handle. This is an excellent design and I think it really elevates what might be considered a low end handle material into something special. It makes for a positive grip in any reasonable way you might hold onto the knife
The blade on the Spyderco Endura 4 is made of VG-10 steel. Vg-10 is no longer considered a super steel but it still beats out a lot of the competition especially when Spyderco’s excellent heat treatment is factored in (More Than Just Surviving recently had an excellent post on Super Steels, it is worth a look if you are into EDC knives).
The plain-Jane Spyderco Endura 4 has a Sabre grind instead of the Full Flat Grind that a lot of the other Enduras have (Spyderco Endura 4 FFG or the Spyderco Endura 4 ZDP-189). This gives the Spyderco Endura 4 a bit more overall blade strength particularly in the tip where the full flat ground blades are so delicately thin. I wouldn’t start prying open ammo boxes with it but the extra tip strength is noticeable.
In knife circles these days there is a lot of negative hype about the simple lock back style lock that the Spyderco Endura 4 has. I’m not one to bash on it. I think that the Spyderco Endura 4 is clearly an EDC knife and as such I don’t expect to have to take on the Stygian Hordes with it. For all but the most extreme tasks the lock back will be fine. It does have a small David Boye dent for a little more piece of mind that you won’t some how disengage the lock while using the knife. In my personal use I have never accidentally disengaged any lock back folder, so I really think this is just Internet hype.
Carrying The Spyderco Endura 4
What can I say about carrying the Spyderco Endura 4? It is light and compact, it’s 4-way adjustable pocket clip conforms to any typical style of carry, and it lacks any pocket shredding hot spots. I can’t even nit pick on it. It might be a tad big for some office environments but it’s smaller cousin the Spyderco Delica 4 is for the indoor crowd.
The Spyderco Endura 4 is a 4.5 out of 5 STARS in my book. It is one of the first knives to combine the features that would become standard in EDC knives. It has a premium steel, a pocket clip, is comfortable to carry, and has a good grip/ergonomics. It only loses out of a 5 Star rating due to the Sabre Grind. In my mind the enhanced cutting ability of the FFG models is what elevates them to 5 Star status. Having said that I still carry my old faithful Spyderco Endura 4 on a regular basis as it has become an old friend by now.
Spyderco Delica 4 FFG
The Spyderco Delica 4 FFG is an awesome piece of resin and steel, and wholly deserving of a review!
The Spyderco Delica 4 FFG is essentially a smaller version of the excellent Spyderco Endura 4 FFG, of which I am an unabashed fan! The Delica’s blade shape differs a little bit from the Endura’s, but if you are familiar with the Endura the Delica will seem like an old friend.
The Full Flat Ground version is a special edition of the Spyderco Delica 4. Spyderco has taken the regular Delica 4 and added a full flat grind on the blade and offers it in a variety of colors.
- 7.125-inch open length
- 4.25-inch closed length
- 2.875-inch VG-10 steel blade
- 2.56-inch cutting edge
- 0.5-inch blade hole
- 0.09-inch blade thickness
- 2.5-ounce weight
- FRN handle material
In my review of the Spyderco Endura 4 FFG I raved about what a good job Spyderco had done in achieving such a lightweight carry knife. Well, all of what I said still holds true but it goes double for the Spyderco Delica 4 FFG! The Spyderco Delica 4 FFG is an incredibly svelte 2.5 ounces. To achive this Spyderco has gone with their excellent Fiberglass Reinforced Nylon (FRN) as a handle material and the knife has skeletonized liners.
The Spyderco Delica 4 FFG is also blessed with an excellent bi-directional texturing job on the handle. In conjunction with some well placed jimping the Spyderco Delica 4 FFG is glued to your hand whether you have gloves on or not.
The Spyderco Delica 4 FFG has an amazingly thin VG-10 blade. VG-10 isn’t a gee-whiz wonder steel anymore but it is a favorite of mine. It sharpens to an almost unbelievably razor sharpness and has decent edge retention. It isn’t nigh indestructible like the M4 on my Benchmade Contegobut it is more than adequate for a lightweight EDC knife. It does sharpen a lot easier than something like S30v.
Like a lot of Spyderco’s the Delica 4 FFG has a bit of a funky blade shape but it works well for me as an EDC knife. The oversized Spyderhole makes opening the Spyderco Delica 4 FFG a breeze under all conditions. The blade doesn’t have enough mass to SNAP open with a flick but with some practice it can be flicked open pretty fast.
The Spyderco Delica 4 FFG should not be used for prying under ANY circumstances! The thin blade is just dying to break under some misuse. Just use it as the superior slicer that it is and be happy!
The Spyderco Delica 4 FFG gets through life with just a lock back to keep the blade open. For a light use knife like the Spyderco Delica 4 FFG I think it is more than adequate. The Delica 4 FFG is just plain doesn’t need a super heavy duty lock as it really isn’t meant for heavy use. I you are looking to storm the castle armed only with a pocket knife and a loin cloth the Spyderco Delica 4 FFG isn’t for you.
Carrying The Spyderco Delica 4 FFG
The Spyderco Delica 4 FFG practically disappears into my pocket. Those 2.5 ounces are easy to forget about until you need it. The blade is ultra sharp and handles light cutting tasks with ease. In my daily work the Spyderco Delica 4 FFG excels at cutting rope, twine, and opening boxes. In a pinch I’ve used to strip some cable but feel that there are a bunch of heavier tools for that job but the Delica 4 FFG did make it through the ordeal.
The Spyderco Delica 4 FFG is another 5 out of 5 Stars EDC knife. It is a joy to carry in your pocket so it will be there when you need it and it’s highly capable VG-10 blade will handle most daily cutting chores. As long as you understand that it isn’t a prybar the Spyderco Delica 4 FFG will give years of faithful service.